NANO 30W Pen Parameters & Preset Guide

PRESET PARAMETERS

This is a section showing you the parameters for each of the pre-sets for different types of metal, cutting and cleaning cycles. These settings are based on a 30W fiber laser.

Pen Number	Metal / Alloy / Action	Loop Count	Speed (mm/second)	Power (%)	Frequency (KHz)	Wobble Diameter (mm)	Wobble Distance (mm)
0	Platinum	1	200	20	30	N/A	N/A
1	Yellow Gold	1	400	35	30	N/A	N/A
2	White Gold	1	400	30	30	N/A	N/A
3	Red Gold	1	400	30	30	N/A	N/A
4	Silver	1	400	70	30	N/A	N/A
5	Brass	1	600	70	30	N/A	N/A
6	Steel	1	400	25	30	N/A	N/A
7	Cut 0.6mm	10	80	100	30	0.08	0.04
8	Cut 0.8mm	20	70	100	30	0.08	0.04
9	Cut 1mm	30	60	100	30	0.1	0.04
10	Cut 1.2mm	50	50	100	30	0.12	0.04
11	Cleaning	1	1000	15	60	N/A	N/A
12	Bitmap	1	400	50	30	0.1	0.08
13	Cut Top	10	70	100	30	0.1	0.05
14	Cut Middle	2	60	100	30	0.08	0.04
15	Cut Bottom	10	50	100	30	0.05	0.03

---

More Nano Support